APPLIED POWDERCOAT, INC.
3101 Camino del Sol
Oxnard, CA 93030
(805) 981-1991
Fax: 805-981-1331
www.appliedpowder.com
Vic Anselmo
Plant Locations: One plant at above address.
Facilities: 30,000 square feet with two conveyor systems and three batch lines.
Substrates: Mixed metals.
Pretreatment: Three-stage, iron phosphate w/ DI water rinse, steel grit blasting, and glass bead blasting.
Coatings Application: Electrostatic corona and tribo application of polyester, polyurethane, and epoxy-based resin coating.
Curing System: Gas-fired convection oven to 450°.
Conveyor/Booth Capacity:Automated lines: 32" H x 15" D x 36" L and 66" H x 24" D x 120" L. Batch lines: 8' x 8' x 24', 5' x 5' x 5', and 9' x 9' x 16'.
Quality Control: QC program in place. Monthly personnel training and evaluation.
CENTRAL POWDER COATING
593 Explorer Street
Brea, CA 92821
(714) 672-9571
FAX (714) 672-9574
www.centralpowdercoating.com
John Cantarini, Co-Owner
CREST COATING, INC.
1361 South Allec Street
Anaheim, CA 92805
(714) 635-7090
FAX (714) 758-8752
www.crestcoating.com
Mike Frasz, Director of Technical Operations
Plant Locations: Two plants in Anaheim, CA.
Facilities: 60,000 sq. ft. in three buildings housing four conveyorized powder/liquid lines. Pad printing, silkscreening, sandblasting, stripping, zinc phosphating.
Substrates: Aluminum die castings, sand castings, extrusions, investment castings, jet coat steel, aluminized steel, cold roll steel, hot roll steel, stainless steel, brass, copper, plastics, wood, glass, composites.
Pretreatment: Three-stage iron phosphate with final DI rinse. Six-stage zinc phosphate dip tank system.
Coatings Application: Automatic, manual, and tribo application. Electrostatic, fluidized bed, and HVLP. Mil spec. liquids, licensed Teflon® applicator, Xylan®, Halar®, Kynar®, nylon, vinyl, RFI/EMI shielding, ESD coatings, VHT, aluminum ceramic, dry lubes, moly, dielectric coatings, chemical resistance coatings, polyurethane, and custom colors.
Curing System Four conveyorized gas-fired ovens, gas and electric batch ovens to 8' x 18'.
Conveyor/Booth Capacity: Batch booths up to 9' x 18', conveyor work package 2' x 4' x 13'.
Quality Control: QC manual per mil I 45208. ISO compliant. In-house lab facilities, salt spray, water immersion, other physical test equipment. Qualified suppliers to automotive, electronic, aerospace industries.
ELECTRO TECH POWDER COATING
836-A Rancheros Drive
San Marcos, CA 92069
(760) 746-0292
FAX (760) 746-0092
www.electrotechcoatings.com
Adam Mitchell, President
Plant Locations: One plant at above address.
Facilities: 13,000 sq. ft. production and warehouse area with batch system.
Substrates: Mixed metal and castings.
Pretreatment: 60/80 garnet sandblasting.
Coatings Application: Manual spray, 12' x 20 booth.
Curing System: 10' x 16' gas-fired oven to 450 degrees.
Conveyor/Booth Capacity: Oven size 10' x 16' x 8'.
FUSION COATINGS, INC.
6421-C Southfront Road
Livermore, CA 94551-5137
(925) 443-8083
FAX (925) 443-8089
fusionc@sbcglobal.net
Paul Fleury, Chief Operating Officer
Plant Locations: One plant at above address.
Facilities: 7,000 sq. ft. Open electrostatic spray booth, 8' x 12'. Pick-up and delivery available in Bay area.
Substrates: Any ferrous or non-ferrous metal which can withstand 400 degrees for 30 minutes.
Pretreatment: Steel, three-stage zinc phosphate pretreatment. Aluminum, Alodine® 1,000 and Alodine® 1,200 pretreatment. Sandblasting and/or burn-off available through contractor.
Coatings Application: Manual electrostatic spray.
Curing System: Specific manufacturers’ recommendations for each powder type are followed.
Conveyor/Booth Capacity: Booth and batch oven capacity of 8' x 8' x 12'.
Quality Control: Five-phase inspection in QC Procedure with documented specifications in QC Manual. Manufacturer’s recommended film thickness is monitored with coating thickness testers on a routine basis.
GEMTECH, INC.
17892 Metzler Lane
Huntington Beach, CA 92647
(714) 848-2517
FAX (714) 847-5589
www.gemtechpowder.com
Shig Shiwota, President
Plant Locations: One plant at above address.
Facilities: Two conveyorized lines, two batch lines.
Substrates: Metals.
Pretreatment: Bead blasting, three-stage iron phosphate washer.
Coatings Application: Manual electrostatic spray.
Curing System: One conveyorized oven 80', two batch ovens 14' x 6' x 8'.
Conveyor/Booth Capacity: Conveyor system 8' x 4' x 3', batch system 14' x 6' x 8'.
Quality Control: In-house QC testing.
IKON POWDER COATING, INC.
1375 N. Miller St.
Anaheim, CA 92806
(714) 961-0010
FAX (714) 961-0080
MCravens@IkonPowdercoating.com
www.IkonPowdercoating.com
Michael Cravens, President
Plant Locations: One plant at above address.
Facilities:Four complete systems, 40,000 sq.ft.
Substrates: All metals, wood, glass, ceramics, plastic.
Pretreatment: Iron phosphate, zinc phosphate, blast, and chem-film.
Coatings Application: Thermoplastic and thermoset powders; high-temp, low-temp, and specialty powders.
Curing System: Gas-fired convection.
Conveyor/Booth Capacity: Very large batch, high volume conveyor.
Quality Control: ISO compliant, in-house ASTM testing, salt fog, humidity cabinet, QUV, SPC.
INLAND POWDER COATING CORPORATION
1656 South Bon View Avenue
Ontario, CA 91761
(909) 947-1122
FAX (909) 923-7082
www.inlandpowder.com
David Flatten, President
Plant Locations: One plant at above address.
Facilities: 70,000 sq. ft. in eight buildings. Conveyorized and batch lines from 10" x 10" x 36" up to 8' x 10' x 35' part size capability. Also abrasive blasting and thermal stripping, special packaging and assembly lines.
Substrates: All metals, some ceramics, and glass.
Pretreatment: Abrasive blast. All lines have automated four to six-stage iron phosphate power washers and various combinations of final rinse and/or DI rinse.
Coatings Application: Manual and automated with reciprocators. Corona and tribo charging powders.
Curing System: Nine gas convection ovens, two gas IR portable boost units.
Conveyor/Booth Capacity: Conveyorized lines from 10" x 10" x 36" to 32" x 80" x 96", with variable speeds up to 33' per minute and weights up to 250 lbs. per ft. Batch lines up to 8' x 10' x 35' with double overhead monorail handling weights up to 3,000 lbs.
Quality Control: Approved for military applications. In-house quality assurance and inventory control department with written manuals, laboratory, and sample/testing booth and oven.
INTENSE POWDER COATING
435 S. Arrowhead
San Bernardino, CA 92408
(909) 889-9978
John Esposito/Jim Reiley
IPS, INDUSTRIAL POLISHING SERVICES, INC.
9465 Customhouse Plaza Ste. H-1
San Diego, CA 92154
(619) 661-1691
Fax: 619-661-1693
www.ipsfinishing.com
Roger Cummings – Powder Coating Specialist
Plant Locations: Tijuana, BC, Mexico.
Facilities:Polishing, plating, powder coating and PVD.
Substrates: Brass, bronze, zinc, steel, aluminum.
Pretreatment: Ultrasonic alkaline with chromic seal.
Coatings Application: All powders, specializing in clears.
Curing System: Convection oven.
Quality Control: Quality Control: ISO 9001: 2000 Certified.
OLYMPIC POWDER COATING, INC.
2737 South Garnsey Street
Santa Ana, CA 92707
(714) 979-2233
FAX (714) 979-2244
www.olympicpowdercoating.com
Mark Cherry, President
Plant Locations: One plant at above address.
Facilities: Three buildings totaling 17,500 sq. ft. Five batch lines accommodating parts to 7' x 8' x 24'. Small parts conveyor opening size, 12" x 26".
Substrates: All metals, some wood.
Pretreatment: Abrasive blast to 20', two 5-stage iron phosphate, chem film, metallizing.
Coatings Application: Manual corona and tribo.
Curing System: Six gas convection ovens.
Conveyor/Booth Capacity: Batch parts to 8’ x 8’ x 24’; conveyor window, 12” x 26”, and 40” x 56”.
Quality Control: Five full-time inspectors, testing equipment, inventory control.
PACIFIC POWDER COATING INC.
8637 23rd Avenue
Sacramento, CA 95826
(916) 381-1154
FAX (916) 381-2811
www.pacpowder.com
Jeff Rochester, Vice President
Plant Locations: One plant at above address.
Facilities: 48,000 sq. ft. with three powder systems.
Substrates: Mixed metals.
Pretreatment: Five-stage iron phosphate.
Coatings Application: Manual electrostatic spray equipment, three spray booths.
Curing System: Two conveyorized gas convection ovens 25' x 30', one batch gas convection oven 20' x 35'.
Conveyor/Booth Capacity: Two conveyorized systems with part capacity of 72" H x 36" W x 60" L. Batch line with part capability 96" H x 120" W x 300" L.
Quality Control: In-house QC, testing program and equipment.
POWDERCOAT SERVICES, INC.
1747 West Lincoln Avenue, Building K
Anaheim, CA 92801
(714) 533-2251
FAX (714) 533-1056
www.powdercoatservices.com
Gail Hutchinson, President
Plant Locations: Six plants at an industrial complex.
Facilities: 65,000 sq. ft. Five conveyorized lines, one batch line. Walk-in blasting room, complete stripping and deburring. 3,600 sq. ft. training facility.
Substrates: General metals, wood, glass composites.
Pretreatment: Abrasive blast with various media. 4-stage iron phosphate. Chem-film for aluminum. DI rinse seal on lines.
Coatings Application: Electrostatic corona and tribo application of epoxies, polyester, polyurethane, hybrids, EAA, EMAA acrylic and nylon. Decorative and functional in thick or thin film finishes.
Curing System: Six convection ovens. Optional gas-fired IR boost for special applications.
Quality Control: ISO certified. Full-service laboratory for testing finish quality and application processing to various standards set by ASTM, military, aerospace, and commercial industries. Full oven instrumentation. Written certification of performance is available.
PRS INDUSTRIES, INC.
1712 Corrigan Court
La Verne, CA 91750
Phone: 909-596-8836
Fax: 909-596-8835
http://www.prsmexico.com/index.shtml
Terry Hausner, CEO
Plant Locations: La Verne, CA; Pomona, CA; Fontana, CA; Tijuana, Mexico
Facilities: 100,000 sq. ft. in six buildings housing five conveyor powder/liquid and seven batch powder/liquid lines. Silk-screening, sandblasting, stripping, burn off. Hardware insertion, welding, spot welding, drilling and tapping.
Substrates: Aluminized steel, cold roll steel, hot roll steel, stainless steel, aluminum and zinc die casts, plastic and wood.
Pretreatment: Three-stage and Five-Stage iron phosphate with final DI rinse. Vapor Degreaser.
Coatings Application: Automatic, Manual, Mini Coater, Electrostatic, Fluidized bed. Dielectric coatings, chemical resistance coatings, polyester, polyurethane, polyolefin, epoxy, TGIC and custom colors.
Curing System Four conveyor gas-fired ovens, Infrared oven, four gas batch ovens to 18 x 38 x 10’.
Conveyor/Booth Capacity: Batch booths up to 12' x 38', conveyor work package 3' x 6' x 10'.
Pick-up and delivery service available: 8- 24 and 20 foot flatbed trucks.
Quality Management: ISO Compliant, Process controls, testing and analysis.
RELIANCE POWDER COATING SYSTEMS, INC.
1577 Factor Avenue
San Leandro, CA 94577
(510) 895-7170
FAX (510) 483-4136
John Hilderbrand
jdh_rpcs@yahoo.com
www.reliance-powder-coating.com
Plant Locations: One plant at above address.
Facilities: 35,000 square feet.
Substrates: All metals.
Pretreatment: 3-stage phosphate with deionized water rinse. One sandblasting booth 10’ x 12’ x 30’ (sand, bead, and plastic blast).
Coating Application: AWWA-approved coater of epoxy fusion bonding. Up to 40 foot substrate. Two booths manual electrostatic spray equipment. One booth 30’ x 10’ x 10’ liquid spray.
Curing System: Two convection gas ovens: 40’ x 10’ x 10’, and 30’ x 10’ x 10’.
Quality Control: In-house QC, testing program and equipment: mil thickness, adhesion, and holiday testing meters.
Pick-up and delivery service available: 24- and 20-foot flatbed trucks.
SPECTRUM PAINT AND POWDER INC.
1332 S. Allec St.
Anaheim, CA 92805
(714) 776-7077
FAX (714) 776-7044
javier@spectrumpaintandpowder.com
www.spectrumpaintandpowder.com
Javier Gonzalez, VP
STAR FINISHES, INC.
40455 Brickyard Dr., #101
Madera, CA 93638
(559) 261-1076
FAX (559) 261-1064
www.starfinishes.com
Michael Barnard, General Manager
SUNDIAL IND., INC.
8421 Telfair Ave.
Sun Valley, CA 91352
(818) 767-4477
Fax: 818-767-6221
shivie@pcoatings.com
www.pcoatings.com
Shivie Dhillon – Manager
Pretreatment: 7-stage washer, sandblasting.
Quality Control: Architectural approved coatings.