BEACON INDUSTRIES, INC.
912 South Walnut Street
PO Box 355
Edinburgh, IN 46124-0355
(812) 526-0100
FAX (812) 526-0200
Lee Breazeale, Chairman/ Max Hill, President
Plant Locations: One plant at above address.
Facilities: 70,000 sq. ft., two conveyorized lines, a large batch line, and generous staging area. Burn-off and blasting capabilities.
Substrates: Mixed metals.
Pretreatment: Five-stage washer with iron phosphate and non-chrome seal.
Coatings Application: Automatic and manual powder systems. Booths on sliding tracks to minimize color change down time, adding flexibility to short color runs. E-coat with zinc phosphate.
Curing System: Conveyorized dry-off and cure ovens up to 450°.
Conveyor/Booth Capacity: Booth openings 32" W x 68" H. Conveyor handles pieces up to 120" long. Batch size 9' x 9' x 32'. 6,000 pound maximum.
Quality Control: ISO 9001:2000 established with quality manual, policies, procedures, and work instructions. ISO 9001:2000 certified.
CARRARA INDUSTRIES, INC.
1619 West 5th Street
Anderson, IN 46016-1071
(765) 643-3430
FAX (765) 643-3336
Jack Henricks, President
Plant Locations: One plant at above address.
Facilities: 6,400 sq. ft. production area and 5,000 sq. ft warehouse space.
Substrates: Mixed metals.
Pretreatment: TT-C-490; five-stage iron phosphate immersion system; three-stage iron phosphate spray wand; acid pickle, abrasive blast.
Coatings Application: Two manual electrostatic guns. Varied colors a specialty.
Curing System: Conveyorized and batch, gas convection oven up to 400 degrees. 8' 6" x 8' 6" part opening. Can handle 25' lengths in the batch system.
Conveyor/Booth Capacity: Parts to 8' 6" x 8' 6" x 25'. Variable speed conveyor: 75 lbs. per hook; manual conveyor: 200 lbs. per hook. Parts to 1,000 lbs.
Quality Control: MIL-I-45208. QC system in place. Defense Department inspection and paperwork available.
CREATIVE COATINGS, INC.
7505 Freedom Way
Fort Wayne, IN 46818
(260) 489-3580
FAX (260) 489-3643
www.creativecoatingsinc.com
Richard Lain, President
Plant Locations: One plant at above address.
Facilities: 100,000 sq. ft. for coating, assembly, and warehousing.
Substrates: All metals.
Pretreatment: Eight - stage iron phosphate.
Coatings Application: Automatic and manual.
Curing System: Gas convection oven to 450 degrees.
Conveyor/Booth Capacity: 66" H x 34" W x 24' L.
Quality Control: In-house lab facilities with salt spray. ISO 9001:2000
NU-TEC COATINGS
1615 Fletcher Avenue
Fort Wayne, IN 46803
(260) 422-2494
Fax: 260-426-2475
Garry Findley – VP Sales
WINONA POWDER COATING, INC.
601 S. Franklin Street
Mentone, IN 46539
(574) 353-7346
FAX (574) 353-7476
Fred Fribley, President
Plant Locations: One plant at above address and one plant in Elkhart, IN.
Facilities: Mentone: 30,000 sq. ft., powder production lines, and one lab line. Elkhart: 49,000 sq. ft., two powder production and one lab line.
Substrates: Mixed metals.
Pretreatment: Iron phosphate.
Coatings Application: Manual and automatic electrostatic powder spray and fluid bed dip.
Curing System: Gas-fired convection.
Conveyor/Booth Capacity: Openings 3' x 6' x 16' L.
Quality Control: QC manual. Lab for powder evaluation and part prototype. Salt spray in-house. Qualified supplier to automotive and military. U.L. approved.