BURKARD INDUSTRIES, INC.
35300 Kelly Road
Clinton Township, MI 48035
(586) 791-6520
FAX (586) 791-8980
jay@burkardind.com
www.burkardind.com
Jay Burkard, Vice President
Plant Locations: One plant at above address.
Facilities: 78,000 sq. ft. with powder coating, e-coating, and light assembly. Two conveyorized lines, one batch system.
Substrates: Mixed metals.
Pretreatment: Eight-stage iron phosphate with deionized water final rinse; 14-stage zinc phospate with in-line acid cleaning/pickling capabilities.
Coatings Application: Manual and automatic electrostatic spray systems.
Curing System: Conveyorized gas convection oven.
Conveyor/Booth Capacity: Parts to 16' x 6.5' x 6.5'.
Quality Control: Full SPC capabilities, salt spray testing, water immersion, impact, hardness, thickness, cure, color booth. Second-tier approval for Chrysler, GM, Ford, Mazda, Toyota, Mitsubishi, Nissan, and Honda. ISO 9001:2000 registered.
GT PERFORMANCE COATINGS LLC
1342 S. Ortonville Rd.
Ortonville, MI 48462
(248) 627-5905
Fax: 248-627-5932
Terry Anway – Owner
terry@motorcity-cobra.com
www.gtperformancecoatings.com
www.gtperfcoatings@aol.com
Facilities: 4,300 sq. ft., including packaging, shipping, and receiving.
Substrates: All metals including ferrous and non-ferrous.
Pretreatment: In-house abrasive and media blasting along with thermal burn-off. Iron phosphate.
Coating Application: All types of powders including decorative textures, thermal barriers, anti-friction, anti-galling, and ceramics for high temperature applications. Manual spray systems.
Curing: Achieved by gas-fired convection batch oven and electric oven.
Conveyor/Booth Capacity: Cart and rack systems per customer needs.
Quality Control: In-house quality control procedures and off-site lab testing to meet specific customer needs.
GYRO POWDER COATING
1624 Marion Avenue
Grand Haven, MI 49417
(616) 846-2580
FAX: 616-846-4855
Peter Van Oordt, President
Plant Locations: One plant at above address.
Facilities: Two conveyorized powder application lines.
Substrates: Mixed metals.
Pretreatment: Both line three-stage iron phosphate.
Coatings Application: Manual spray both lines.
Curing System: Gas-fired combination dry-off and cure ovens.
Conveyor/Booth Capacity: Parts to 32" x 48" x 96" long.
Quality Control: Designed to meet specific customer requirements.
HAHN’S POWDER/LIQUID COATING
25247 Van Born Rd.
Taylor, MI 48180
(313) 291-3600
Fax: 313-291-0018
Richard Hahn – President
Facilities: Batch booth 16’ x 10’, two 15’ x 25’ liquid spray down draft spray booths.
Pretreatment: Steam chemicals clear station 16’ x 6’.
Substrates: Custom parts for race cars.
Curing System: Batch oven 16’ x 8’.
KOPACZ INDUSTRIAL PAINTING INC.
12225 Merriman
Livonia, MI 48150
(734) 427-6740
FAX (734) 427-4630
Edward Kopacz, President
Plant Locations: One plant at above address.
Facilities: 5,000 sq. ft. with overhead and over-under conveyor lines for liquid dip and spray applications.
Substrates: All metals: aluminum, cold-rolled steel, castings, brass, etc.
Pretreatment: Abrasive blast, vapor degreasing.
Coatings Application: Powder, Military CARC, enamels, conductive coatings, textures, etc.
Curing System: Two gas-fired batch ovens.
Conveyor/Booth Capacity: Two 5 ft. spray booths, one 10 ft. booth.
Quality Control: In-house testing capabilitites.
METOKOTE CORPORATION
434 McCormick Drive
Lapeer, MI 48446
(810) 664-8861
FAX: 810-664-7620
www.metokote.com
Dennis Manza, Plant Manager
Plant Locations: One plant at above address. Additional plants in Lima, Huber Heights, Sheffield Village, & Toledo, OH; East Moline & Peru, IL; Cedar Falls, IA; Hopkinsville, KY; Sumter, SC; Lebanon, TN; São Paulo, Brazil; Cambridge, Ontario; Saltillo & Monterrey, Mexico; and Daventry, U.K. (see Ohio listing for description)
RELIANCE FINISHING CO.
1236 Judd, SW
Grand Rapids, MI 49509
(616) 241-4436
FAX (616) 241-0063
mikm@relfn.com
www.reliancefinishing.com
Michael Mosey, President
Plant Locations: 3 plants at the above address.
Substrates: Aluminum, zinc, brass, magnesium, steel.
Pretreatment: Iron phosphate, aluminum conversion coating, zinc phosphate, brass seal.
Coatings Application: Manual and automated electrostatic spray of various powders.
Curing System: Gas convection ovens.
Part Profile: 36 x 24 or smaller.
Quality Control: ISO 9001:2000. Oven profiling, gloss, milage, adhesion, water immersion, humidity and salt cabinets.
WISCONSIN PAINT & POWDER COAT INC.
825 Main Street
Hortonville, MI 54944
(920) 779-9790
Fax: 920-779-9791
E-mail: wippc@msn.com
www.wwippc.com
Tim & Stephanie Morgan – Owners
Facilities: 50,000 square foot building.
Conveyor/Booth Capacity: 650' continuous production line. Capable of handling pieces 30" wide , 60" high and 25' long
Pretreatment: 5-stage iron phosphate wash system. 24’ x 24’ blast booth.
Curing System: Batch ovens 8’ x 8’ x 24’; 6’ x 6’ x 8’.