ADVANCED SURFACE FINISHING, INC.
111 Magnolia Avenue
Westbury, NY 11590
(516) 876-9710
FAX (516) 334-6039
Peter Tobias, Owner/President
DELOKA, LLC
150 Dunn Rd.
Lyons, NY 14489
(315) 946-6910
FAX (315) 946-6949
info@deloka.com
www.deloka.com
Roger Westerman, General Manager
Plant Locations: One plant at above location.
Facilities: 22,000 sq. ft. Large parts or batches. Two-bay loading dock and inside tractor trailer load/unload.
Substrates: Most metals.
Pretreatment: Five-stage batch wash system, 15' x 20' x 45' abrasive blast booth.
Coatings Application: Manual electrostatic spray.
Curing System: Three million BTU gas-fired batch oven. Part size up to 10' x 10' x 45' and 5,000 lbs.
Conveyor/Booth Capacity: Booth sized to complement oven capacity.
Quality Control: In-house QC, consisting of adhesion test, hardness test, bend test, solvent cure, dry film thickness, 100% visual inspection.
O. W. HUBBELL & SONS, INC.
PO Box 37
New York Mills, NY 13417
(315) 736-8311
hubbell@dreamscape.com
www.hubbellgalvanizing.com
Johnathan Hubbell, Vice President
Powder coating over hot dip galvanizing, mainly ornamental ironwork.
O'DONNELL CUSTOM FINISHES LLC.
216 Erie Blvd. East.
Rome, NY 13440
(315) 533-1913
Fax: 315-533-1929
John@odonnellmetal.com
John O'Donnell
Faciliies:Three batch lines 10' by 16' by 18'.
PATTI'S PORTICO, INC.
140 Highland St.
Port Chester, NY 10573
(203) 869-6227
(914) 935-8839
(877) 4-PATIOS
FAX (203) 869-2793
www.pattisportico.net
Patti DeFelice, President and Robert Jansen, Owner
Plant Locations: One plant at 140 Highland Street, Port Chester, NY 10523.
Facilities: 10,000 sq. ft. specializing in motorcycle frames, marine and outdoor furniture restoration, wrought iron railings, and automotive parts. Pick up and delivery capacity, welding and repairs.
Substrates: Aluminum, wrought iron, cast iron, steel.
Pretreatment: Sandblasting, priming.
Coatings Application: Manual electrostatic spray of polyester.
Curing System: Gas convection oven, 8' W x 10' L.
Quality Control: 100% inspection before delivery.
TROJAN POWDER COATING COMPANY
2215 Union Boulevard
Bay Shore, NY 11706
(631) 968-5040
(800) 475-8572
FAX (631) 968-5939
www.trojanpowder.com
Carl Troiano, President
Plant Locations: One plant at above address.
Facilities: 76,000 sq. ft. with two conveyorized lines, two batch ovens.
Substrates: Mixed metals.
Pretreatment: Four-stage iron phosphate with final rinse/sealer.
Coatings Application: Manual and automatic electrostatic spray.
Curing System: 150' gas-fired conveyorized oven; one batch oven, 10' x 12'; one batch oven, 4' x 20'.
Conveyor/Booth Capacity: Opening 44" W x 72" H x 288" L.
Quality Control: In-house QC and testing programs.
Certifications: Licensee for Decoral.
W. W. CUSTOM CLAD, INC.
337 East Main Street
Canajoharie, NY 13317
(518) 673-2744
FAX (518) 673-2745
www.wwcustomclad.com
Charles Wright, President
Plant Locations: Four plants at above address.
Facilities: 42,000 sq. ft. with eight powder coating areas. Work predominantly with OEMs in the automotive and general metals industry.
Substrates: Mixed metals, plastics, emphasis on zinc and aluminum die castings.
Pretreatment: Three 5-stage, tri-metal, iron phosphate power washers with demineralized final rinse. Three-stage immersion. Eleven-stage aqueous epoxy prime for zinc die castings. Sandblasting, shot blasting, and vibratory finishing.
Coatings Application: Manual and automatic powder spray, including a clean room for clear powder application. Fluid bed system.
Curing System: Four batch ovens and four conveyorized ovens (gas and electric), one electric infrared convection to 550 degrees, infrared preheat system.
Conveyor/Booth Capacity: Variable speed conveyors, 50 lb. centers. Part size 4' W x 4' D x 11' L.
Quality Control: QC manual in place. SPC. Surveyable, rated company. Physical testing lab, General Motors GP 10 rated. Salt spray, humidity, color analysis, and ASTM physical testing.