APPLIED POWDER & COATINGS INC.
942 Valley Brook Road
Boothwyn, PA 19061
(610) 361-1889
(800) 734-8357
Fax: 610-361-0185
info@appliedpowdercoatings.com
www.appliedpowdercoatings.com
James Snyder - President
Plant Locations: 394 Parkmount Road, Glen Riddle, PA 19037
Facilities: 20,000 square feet. Has shipping and receiving docks. Offers assembly and light machining, and packing services.
Substrates: All metal.
Pretreatment: 5-stage phosphate/large pretreatment booth for large parts and high pressure steam.
Coatings Application: Corona and tribo spray, fluidized bed, and plastisol dip.
Curing System: Four gas and one electric convection oven.
Conveyor/Booth Capacities: Batch 12'w x 9'H x 20'L. 240' Conveyor.
Quality Control: Electronic and visual.
COST EFFECTIVE COATINGS, INC.
12069 East Main Street, Box 70
North East, PA 16428
(814) 725-8637
FAX (814) 725-5146
Richard King, Sales Manager
Plant Locations: One plant at above address.
Facilities: 42,000 sq. ft. with four powder coating lines.
Substrates: Mixed metals.
Pretreatment: Four- and 5-stage iron phosphate washers. Hot sand bed system for stripping.
Coatings Application: Manual and automatic spray, manual fluidized bed.
Curing System: Four conveyorized ovens.
Conveyor/Booth Capacity: 30" x 50" x 120".
Quality Control: QC manual in place. Specific process controls are developed for each customer.
GILL POWDER COATING
1384 Byberry Road
Bensalem, PA 19020
(215) 639-5486
Fax: 215-639-7560
www.gillpowder.com
Jim Gill – President
Plant Locations: One plant at above address.
Facilities: 31,000 sq. ft. with two powder coating lines.
Substrates: All metals.
Pretreatment: Automatic line – 5-stage pretreatment. Batch line – steam cleaning with chrome-free final rinse.
Coatings Application: Automatic line – 10 automatic guns and 2 hand-held guns. Batch line – 2 hand-held guns. All are electrostatic.
Curing System: Automatic line – 100’ tunnel oven with 40’ infrared and 60’ hot air convection. Batch line – 10’ x 8’ x 8’ hot air convection.
Conveyor/Booth Capacity: 16’ x 7’ x 2’.
Quality Control: QC manuals in place. Specific process controls are developed for each customer.
KEENER KOATINGS INC.
3711 Board Road
York, PA 17402
(717) 764-1106
FAX (717) 764-1100
Dean Keener, President/Chris Keener, Vice President
Plant Locations: One plant at above address.
Facilities: Powder coating, burn-off and stripping, assembly and packing services.
Substrates: All metals.
Pretreatment: Four-stage washer with iron phosphate and blast cleaning.
Coatings Application: Electrostatic.
Curing System: Hot air convection ovens up to 8' x 8' x 30' and 3' x 7' x 107'.
Conveyor/Booth Capacity: 3' x 6' x 20'
KEYSTONE COATING LLC
295 Woodcorner Road
Lititz, PA 17543
(717) 738-7365
Fax: 717-738-7370
Rodger.weaver@keystonekoating.com
www.keystonekoating.com
Rodger Weaver, VP of Operations
Plant Locations: Two plants in Lititz, PA, and one plant in Mifflintown, PA.
Substrates: All metals.
Pretreatment: Grit blasting, 7-stage iron phosphate with sealer.
Coatings Application: Manual and automatic spray.
Curing System: Gas convection/infrared.
Conveyor/Booth Capacity: 36” wide x 72” high x 240” long.
Quality Control: Customer specified.
LAUREL AUTOMATED PAINTING
84 Iron St., P.O. Box 666
Johnstown, PA 15907
(814) 536-6424
(877) LAUREL9
FAX (814) 536-7234
mhughes@laurelpowder.com
www.laurelpowder.com
Matthew J. Hughes, Vice President
Plant Locations: One plant at above location.
Facilities: 60,000 sq. ft. with warehouse, rear and side-load shipping/receiving dock. Climate-controlled environmental room.
Substrates: All metals.
Pretreatment: Eight-wheel automated shot blaster prior to 6-stage wash. Includes alkaline, iron phosphate, non-chrome sealer.
Coatings Application: Two roll-on/roll-off systems, with 16 automatic nozzles and two manual guns.
Curing System: Three-zone computer-controlled oven capable of curing steel up to 14" thick and 6,000 lbs.
Conveyor/Booth Capacity: 1700 ft. conveyor on 6" I-beam; up to 10' per minute and 6,000 lbs. 4' x 7' x 15'.
Quality Control: ISO 9001:2000 certified.
POWDER CRAFT, INC.
4 Tabas Lane
Exton, PA 19341-2753
(610) 280-3770
FAX (610) 280-3763
www.powdercraft.com
Joseph Pepe, President
Plant Locations: One plant at above address.
Facilities: 14,000 sq. ft.
Substrates: All.
Pretreatment: Iron phosphate for ferrous metals, non-chrome for non-ferrous, both dip or spray. Abrasive grit blast capability in-house for large and small parts.
Coatings Application: Tribo and corona manual powder spray. Small part fluid bed.
Curing System: Gas and electric convection curing ovens, gas convection dry-off oven.
Conveyor/Booth Capacity: Batch booth: 13' H x 8' W x 25' L with maximum part weight of one ton.
Quality Control: 100% visual inspection.